S. No | Component | Qty./crd. | Description |
1 | 96 pin Euro connector male wire-wrap type | 1 | For input and for backplane connection |
2 | 26 pin FRC connector male | 4 | For Output |
3 | MC10125 Dip-16 | 11 | ECL-TTL converter |
4 | MC10124 Dip-16 | 6 | TTL ECL converter |
5 | 74F574 Dip-20 | 4 | Latches |
6 | 7C245A Dip-24 | 4 | Lookup PROMS |
7 | Power Connector 4 pin male | 1 | For power connection |
8 | 96 pin EURO connector female (solder type) | 2 | MB to DB connection |
S. No | Component | Qty./crd. | Description |
1 | 96 pin Euro connector? male (solder type) | 2 | MB to DB connection |
2 | FPGA, 6024ABC256-3 256 pin BGA | 2 | Main FPGAs |
3 | IDT 71256L20Y Small outline (J-Bend) Rams | 4 | For Delay and re-circulation |
4 | 74LS123D SOIC-16 | 1 | For reset |
5 | 32MHz Oscillator on Dip-14 | 1 | For test purposes |
6 | MC33269 D (SOP 8) | 2 | 5 V to 3.3 V regulator |
7 | EPC 1441 Dip-8 | 2 | Configuration EPROM |
8 | 26LS31 D (SO-16) | 6 | TTL to TTL- differential converter for bus communication |
9 | 26LS32 D (SO-16) | 6 | TTL- differential to TTL converter for bus communication |
10 | 50 pin FRC connector (male type) | 1 | For bus communication |
11 | Reset Switch push button | 1 | For reset of card |
12 | De-coupling capacitors | One per chip and for power | |
13 | Delay lines on Dip-8 | 2 | For clk32, init and clk3225 |
14 | MC10125FN (PLCC) | 2 | For 32.25MHz clock and init. |
S. No | Component | Qty./crd. | Description |
1 | 96 pin Euro connector (female type) | 5 | For input and for backplane connection to the cards. |
2 | 26LS31 (16 pin DIP) | 24 | 12 for cards on same backplane and 12 for carrying bus signals to next backplane. |
3 | 26LS32 (16 pin DIP) | 24 | 12 for cards on same backplane and 12 for carrying bus signals to next backplane. |
4 | EPLD 5032 | 2 | For bus control and card reset. |
5 | 50 pin FRC male | 7 | For bus communication. 1 for connection to PC and 1for connecting to other backplane and 1 for input to each card. |